It is currently Thu Jun 07, 2018 8:35 pm

All times are UTC - 8 hours [ DST ]


Forum rules


Please, keep discussions on topic and in the right forum. The start menu topics go into the Classic Start Menu forum, etc. This makes it easier for people to locate topics they are looking for.
If you get a satisfactory response to your question, please mark the topic as "solved". Click the green √ button in the bottom-right of the post.



Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Mon Jan 01, 2018 8:56 pm 
Offline

Joined: Mon Jan 01, 2018 8:02 pm
Posts: 3
I'm wondering if the problem I'm having is either related to Classic Shell or if can be fixed by adjusting a Classic setting.

Here's what's happening: the vast majority of the time, whenever I try to drag & drop files from one folder to another while pressing the right mouse button in Explorer (to change the behavior from the default to either explicit copy or move), the Explorer context menu almost immediately takes over, effectively making drag & drop impossible (although every once in a while it works correctly). This only happens on my Windows 10 Pro (1703) machine, and never happens on my Windows 7 Pro computers.

In the full settings for the Classic Start Menu (v4.3.1), there's an item under the "General Behavior" tab named: "Drag/drop hide delay". Now, this sounds to me like what it does is increase the time it takes while waiting for a possible drag & drop operation before the explorer context menu "takes over". But the description that shows up while hovering doesn't seem to agree with that concept, but it's a bit ambiguous. So the first question is: Can anyone provide a fuller explanation of just what that setting does and if it's germane to my problem?

And if it's not relevant, is there a Classic Shell setting that would help resolve this problem?

Thanks!




It turned out that the problem was my mouse! :oops:

It's decades old -- it's a Logitech Trackman Marble, which they stopped making many years ago, but I had to keep using it because it's by far my favorite mouse.

Here's what must have been happening: The internal switch under the right mouse button was giving intermittent contact. So when Explorer "saw" even a brief electrical disconnection, it looked as if I had stopped pressing down on the right button, so it correctly switched from Drag & Drop mode into Context Menu mode.

Just a few minutes ago I connected a different mouse, and the problem went away!

Thanks to all for your patience!


Last edited by Umbert on Wed Jan 03, 2018 6:50 pm, edited 1 time in total.

Top
 Profile  
Reply with quote  
PostPosted: Tue Jan 02, 2018 3:00 am 
Offline
User avatar

Joined: Tue Nov 21, 2017 10:52 am
Posts: 73
Location: Liepaja, Latvia
picture below


Attachments:
help.PNG
help.PNG [ 2.17 KiB | Viewed 1436 times ]
Top
 Profile  
Reply with quote  
PostPosted: Wed Jan 03, 2018 12:42 pm 
Offline

Joined: Mon Jan 01, 2018 8:02 pm
Posts: 3
Blokk888 wrote:
picture below


Thank you for your cryptic reply. Yes, those are the same settings & values I have. But clearly I'm too stupid to understand how that answers my questions. Perhaps you wouldn't mind elaborating, please?

For example, does that "Drag/drop hide delay" setting actually control the time it takes waiting for a possible drag & drop operation before the explorer context menu "takes over"? Or does it do something else, such as control the delay for dragging something out from the context menu itself to the desktop or folder before the menu closes, which is what the confusing description says? I ask because changing that value, even massively, does not appear to make any difference in what I'm describing in my OP.

Please help me understand your response. Thank you.


Top
 Profile  
Reply with quote  
PostPosted: Wed Jan 03, 2018 1:14 pm 
Offline
User avatar

Joined: Tue Nov 21, 2017 10:52 am
Posts: 73
Location: Liepaja, Latvia
this mostly happens on windows 10 explorer.exe


Top
 Profile  
Reply with quote  
PostPosted: Wed Jan 03, 2018 2:52 pm 
Offline
User avatar

Joined: Sun Jan 06, 2013 1:44 pm
Posts: 1939
That setting applies to the start menu, not windows explorer. All classic shell affects in explorer (on windows 10) is the addition of a toolbar
Basically your issue shouldn't be related to classic shell.


Top
 Profile  
Reply with quote  
PostPosted: Wed Jan 03, 2018 5:45 pm 
Offline
User avatar

Joined: Thu Jun 13, 2013 12:07 pm
Posts: 1014
Hi.
Looking at the CSM tool tip for "Drag/drop hide delay",
says Lets you drag from the menu to the Desktop or other programs.

I then Googled drag and drop problems with Windows 10

one of links is here:

https://howtoremove.guide/windows-10-dr ... t-working/

Don't know if it works or not. I don't have that problem with Win 10 1709


Top
 Profile  
Reply with quote  
PostPosted: Wed Jan 03, 2018 6:51 pm 
Offline

Joined: Mon Jan 01, 2018 8:02 pm
Posts: 3
It turned out that the problem was my mouse!

It's decades old -- it's a Logitech Trackman Marble, which they stopped making many years ago, but I had to keep using it because it's by far my favorite mouse.

Here's what must have been happening: The internal switch under the right mouse button was giving intermittent contact. So when Explorer "saw" even a brief electrical disconnection, it looked as if I had stopped pressing down on the right button, so it correctly switched from Drag & Drop mode into Context Menu mode.

Just a few minutes ago I connected a different mouse, and the problem went away!

Thanks to all for your patience!


Top
 Profile  
Reply with quote  
PostPosted: Wed Jan 03, 2018 8:15 pm 
Offline
User avatar

Joined: Thu Jun 13, 2013 12:07 pm
Posts: 1014
That's good. :)

I've had problems like that too. The mouse wire would break at the entry point of body.
It would work most of the time. I go through cheap mice every couple of years.

One expensive Microsoft wireless mouse, I wore out the left button. I really had to click it hard to make electrical contact. I unsoldered both the left and right switches, reversed positions,
and resoldered. Still use it to this day. Got to be 10 years old now!

Yeah, sometimes it's oxide buildup on the switch contacts, or the metal elements just wore down,
from thousands of hits.


Top
 Profile  
Reply with quote  
PostPosted: Wed Jan 03, 2018 10:18 pm 
Offline
User avatar

Joined: Tue Nov 21, 2017 10:52 am
Posts: 73
Location: Liepaja, Latvia
i'm so stupid to answer questions ಠ_ಠ


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group, Almsamim WYSIWYG Classic Shell © 2010-2016, Ivo Beltchev.
All right reserved.